Wednesday, November 02, 2005

Step 2

Figs 5 and 6 show the back removed and then the ribbon cable that has to be removed to seperate the back. There are several flat orange cables that have to be disconnected. There is always a brown piece of plastic that has to be flipped up with a finger nail or a small flat screwdriver. they go back in very easily. Some of the brown flips are different, but you should be able to figure it out.

Fig 7 and 8 show the screws that are under the side flap that covers the digital out connector, once this plastic is removed, you also need to remove the scres on the side holding the metal plate.


Post a Comment

<< Home